Floor Cleaning Machine for Construction
Our factory is one sole professional manufacturer to produce floor cleaning machine depending on strong technical power. Multifunctional cleaning machine with double-surface milling cutter, researched on the basis of the fourth and fifth style, fits for hair on surface of bridge and cement floor with high efficiency, high quality and top-grade quality.
Type |
QHJ-560 |
Overall Dimension |
80×520×820MM |
Weight |
120kg |
Motor Type |
Y90L-6 |
Rating |
（Three-phase）380V |
50HZ |
Power |
1.5KW-3.0KW |
Working Area |
500mm |
Rotate Speed of Milling Cutter |
220r/min |
Rating Three-phase |
380V |
Notice:
1. Fit for cleaning many kinds of concretions of sand mixture, hair on bridge surface and surface of cement files under 500#
2.Concrete and steel bar 5cm above the floor should be left to prevent damage of the machine
3.Machine should be started after holding the handle, it is forbidden to stand before the machine
4.This machine can not be reversed, look at circumrotating direction while startup5. Drag line should not be lower than 1.5m2 three-phase core wire and should not be longer than 150m.
Guarantee and Repair:
1. 2.0kg gear wheel should be added into the gear case until reaching center of oil mirror of oil surface for first application.Gear wheel oil should be changed for every 300hours of application.
2. Before application every time, lubricant should be added onto the chain, motor oil should be kept at center of the oil mirror.
3. Check whether voltage of the motor under normal state, connecting wire is firm or not, if there is broken part
4. Sprinkle some water before cleaning the floor to lessen flying dust 5. Check whether there is loose part before application every time, exposed part should be washed and painted with lubricant after application
#Tools Equipped with the Machine
One 14-17 Opening Spanner, one Cross Type Screwdriver, one 8-10 Opening Spanner, one horizontal type screwdriver
#Guarantee
Floor cleaning machine for construction site puts emphasis on achieving top-grade construction with high speed and high profit. We are willing to provide satisfied consultation and technical service if you have quality problems. We will keep the machine under good repair within three months since sale except following states: voltage did not conform to requirement, suffer from damp, improper conveyance, storage and application, as well as normal abrasion of parts and components that are easy to be wore. We are willing to offer service and fittings that are easy to be wore with payment. |
